ARDUINO 1.8.9 2019.03.15
[ide]
* New target! ARM64 boards are now fully supported (Nvidia Jetson and RaspberryPi3 with 64bit operating system)
* Fix UTF8 related bugs on Windows
* Fixed: can now compile again using OpenJDK (removed dependency on JavaFx)
* Fixed: only use touchBar on OSX 10.12 or higher
* PluggableDiscovery: easily add your own discoverer and make it available in Boards/Port menu (thanks @PaulStoffregen for the idea and the initial implementation)
* LibManager: reduce slowdown when searching
* Fixed: ensure a sketch line is visible when it contains an error and must be highlighted
* Linux: the installer now tries to install a symlink is /usr/local/bin (this doesn't affect usual non-systemwide installation) Thanks @2E0PGS
[wifi-updater]
* Fix firmware upgrade not being available for 3rd party WINC boards
[arduino-builder]
* Use lexicographic distance as last chance to spot the right library (if every other tecnique failed)
* Fix some prototypes being inserted in the middle of a function
Verze 1.9.8
Verze 1.9.8
UNO, NANO, Mikro, PRO mini, DUE, ESP32S2, RPi PICO
Pavel1TU
"Správně napsaný kod lze číst jako knihu"
Pavel1TU
"Správně napsaný kod lze číst jako knihu"
Re: Verze 1.9.8
No hlavně je to 1.8.9 - jsem se na tabletu upsal
a podle všeho je to normální, finální verze - čekám až to někdo prubne, poslední dobou co nainstaluji - nejde (viz, KiCAD)
a podle všeho je to normální, finální verze - čekám až to někdo prubne, poslední dobou co nainstaluji - nejde (viz, KiCAD)
UNO, NANO, Mikro, PRO mini, DUE, ESP32S2, RPi PICO
Pavel1TU
"Správně napsaný kod lze číst jako knihu"
Pavel1TU
"Správně napsaný kod lze číst jako knihu"
Re: Verze 1.9.8
Řeknu to takto, nečekal jsem, že potřebuješ odezvu. Prostě jsem to nainstaloval a lehce odzkoušel a hotovo.
Ano v základu to funguje.
Ano v základu to funguje.
Kdo je online
Uživatelé prohlížející si toto fórum: Žádní registrovaní uživatelé a 2 hosti