resp=0x00 chyba

Odpovědět
Markussis
Příspěvky: 1
Registrován: 03 čer 2018, 01:21
Reputation: 0

resp=0x00 chyba

Příspěvek od Markussis » 03 čer 2018, 01:25

Dobrý den, nedávno jsem si zakoupil arduino uno a dnes se mi při práci objevila následujíci chyba:
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
Zkontroloval jsem nastavení desky, portu, aktualizoval ovladače a stále nic. Nevíte co s tím ?

MichalCzEJ
Příspěvky: 17
Registrován: 03 bře 2018, 21:38
Reputation: 0

Re: resp=0x00 chyba

Příspěvek od MichalCzEJ » 03 čer 2018, 12:10

Vypadá to, jako by jsi arduino neměl ve flash módu, zkus propojit GPIO 0 na zem. Případně zkusit jiný kabel, občas se to stává i kabelem.

Odpovědět

Kdo je online

Uživatelé prohlížející si toto fórum: Žádní registrovaní uživatelé a 7 hostů